News

  • 0
  • 0

Global tantalum carbide powder market trend 2023-2030 The Most Heat-resistant Material in the World by Newswwwplexgroup

A shortage of natural gas has hit the food-processing industry, which relies heavily on natural gas, with Germany's sugar industry saying many sugar plants are unable to produce due to a shortage of natural gas.

About 30 percent of the world's sugar supply comes from beets, and the European Union is the world's largest producer of sugar. The beet sugar tantalum carbide powder are still very uncertain.

Researchers have developed two new heat-resistant materials, tantalum carbide (TaC) and hafnium carbide (HfC), which can withstand temperatures up to nearly 4000.
 
It is worth mentioning that the research team from Imperial College London also found that the melting point of hafnium carbide set a new record in the field of materials. Considering the ability of the two materials to withstand extremely high temperatures of nearly 4000 , the two materials are likely to be used in even harsher and extreme environments, such as the thermal shields of the next generation hypersonic spacecraft.
 
Both tantalum carbide and hafnium carbide are refractory ceramics, which means that these two materials have excellent heat resistance. The ability of the two materials to withstand extreme environments means that their potential applications may include thermal protection systems for high-speed spacecraft and fuel cladding in nuclear reactors in superthermal environments. However, because there is no technology to test the melting point of TaC and HfC in the laboratory, it is uncertain whether they are really competent to work in extreme environmental conditions.
 
To this end, researchers have developed a new extreme heating technology that uses lasers to test the heat resistance of TaC and HfC. Using this technique, the researchers determined the melting points of the single substance and mixture of TaC and HfC, respectively. The study was recently published in the journal Scientific Reports.
 
They found that the measured melting point of the mixture of two kinds of ceramics (Ta0.8H2O20C) was consistent with the previous results, reaching 3905, but the melting point of the two compounds themselves was higher than previously found: The melting point of TaC was 3768, while that of HfC was 3958.
 
The emergence of these two materials will pave the way for the development of the next generation of hypersonic aircraft, the researchers said. This means that future spacecraft can become much faster than ever before.
 
The study was carried out by Dr Omar Dilos Balazar (Omar Cedillos Barraza) during his PhD in the Physics Department of Imperial College London.
 
"When an aircraft flies at a hypersonic speed of more than Mach 5, its friction with the air creates a very high temperature," Dr. Sediros Balazar said. So far, neither TaC nor HfC has been used in the development of hypersonic aircraft. However, our new findings show that these two materials are more heat-resistant than we previously thought, and in fact their heat resistance has exceeded that of any other known compound. This fact means that they may be used for new types of spacecraft: in the atmosphere, they can fly like ordinary aircraft and then fly through space at hypersonic speeds. These two materials enable the spacecraft to withstand the extreme heat generated by shuttling between the atmosphere. "
 
Examples of potential uses of TaC and HfC are the nose covers of spacecraft and the edges of external instruments that have the most friction with the outside world during flight.
 
At present, spacecraft with more than Mach 5 are not yet capable of manned flight. But Dr Sederos Balazar points out that this dream is likely to come true in the future.
 
Dr Sederos Balazar added: "our tests show that these two materials have great potential in building future space spacecraft. The fact that these two materials can withstand such high extreme temperatures means that it is really possible for manned hypersonic spacecraft to emerge in the future. If we can fly at Mach 5, the flight time from London to Sydney will only take about 50 minutes, which will open up a new continent with new business opportunities for countries around the world. "
 

Tantalum Carbide TaC and Hafnium Carbide HfC Powder Supplier
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and nanomaterials including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality TaC powder and HfC powder, please feel free to contact us and send an inquiry. ([email protected])

 

The EU’s draft REPowerEU plan calls for an increase of 15TWh of rooftop PV capacity by 2022. The draft also calls for EU and national governments to take action this year to reduce the time required to obtain permits for rooftop PV installations to three months, and proposes that "all new buildings and existing buildings with an energy grade OF D or above should have rooftop PV installations by 2025".  

In addition, the European Commission is likely to set a target for installed PV capacity of 300GW by 2025 and 500GW by 2030. Some members are more aggressive, with Austria, Belgium, Lithuania, Luxembourg, and Spain demanding a 1TW target for 2030.  

The REPowerEU initiative, worth 195 billion euros, was proposed by the EU on March 8 to phase out member states' dependence on Russian fossil fuels by 2030. In a few days, the European Commission will present a package to implement the RePowerEU strategy.  

As an important application scenario of distributed PV, rooftop PV is not limited to land, and the development conditions are relatively convenient.  

Since the end of 2021, Spain, France, the Netherlands, and other countries have introduced policies and measures such as government subsidies, tax cuts, fee reductions, and accelerated grid-connection approval to encourage the development of distributed PV.  Europe's potential for rooftop PV is huge and will continue to be an important growth pole for the industry, according to Wood Mackenzie.

Luoyang Tongrun Nano Technology is a trusted chemical supplier and manufacturer providing high-quality chemicals and Nanomaterials. If you are looking for the tantalum carbide powder, please feel free to contact us and send an inquiry.

Inquery us

NEXT NEWS

Our Latest News

Global tantalum carbide powder market trend 2023-2030 The Most Heat-resistant Material in the World by Newswwwplexgroup

A shortage of natural gas has hit the food-processing industry, which relies heavily on natural gas, with Germany's sugar industry saying many sugar plants are unable to produce due to a shortage of natural gas.About 30 percent of the world's sugar s…

Global niobium carbide powder market trend 2022-2026 Is Niobium Carbide NbC Hard? by Newswwwplexgroup

John Albanese, leader of the Australian Labor Party, was sworn in as Australia's new prime minister. After his victory, Albanese said he would "make a big change" in the country's climate policy. "We now have an opportunity to end the 'climate wars'…

Global MoS2 powder market trend 2025-2029 Molybdenum Disulfide MoS2 For Lubrication by Newswwwplexgroup

US President recently decided to invoke a Cold War-era defense law to encourage domestic MoS2 powder. Molybdenum disulfide (MoS2) is known as the "king of lubrication" and has its unique advantages in the field of lubrication. It has a la…